Approved Power Tool Attachments; Mounting The Bike Handle - Stihl FS 131 Instruction Manual

4 Approved Power Tool Attachments

(250 mm dia.)
14 Chisel tooth circular saw blade 200-22
(4112), chisel tooth circular saw blade 200-22
HP (4001)
WARNING
Non-metal grass cutting blades, brush knives
and circular saw blades are not approved.
3.3 Deflectors, Limit Stop
15 Deflector for mowing heads
16 Deflector with
17 skirt and blade, for mowing heads
18 Deflector without skirt and blade, for metal
cutting attachments 9 to 13
19 Limit stop for circular saw blades
3.4 Handles
20 Loop handle
21 Loop handle with
22 barrier bar
23 Bike handle
3.5 Harnesses
24 Shoulder strap may be used
25 Shoulder strap must be used
26 Full harness may be used
27 Full harness must be used
4 Approved Power Tool
Attachments
The following STIHL attachments may be used
with the basic power tool:
Attachment
BF
1)
HL 145°
1)
HT
3)
RG
1) 2)
SP
1)
Not approved for bike-handled machines
2)
Use handle hose supplied with the machine
3)
Use barrier bar on loop-handled machines
0458-432-8321-B
Application
Cultivator
Long reach hedge trim‐
mer
Pole pruner
Weeder
Special harvester
5

Mounting the Bike Handle

5.1 Mounting Bike Handle with
Swiveling Handle Support
The machine is supplied with the swiveling han‐
dle support already mounted on the shaft. To
mount the handlebar it is necessary to remove
the clamp moldings.
5.1.1 Removing the Clamp Moldings
► Hold the lower clamp (1) and upper clamp (2)
firmly together.
► Release the wing screw (3) – the clamps are
loose once the wing screw has been released.
They are pushed apart by the two
springs (4 and 5).
► Pull out the wing screw – the washer (6)
remains on the wing screw.
► Separate the clamp moldings – the
springs (4 and 5) remain in the lower clamp.
English
13