Advertisement
Foreword
These instructions are given as a guide to
good practice in the installation, start-up,
operation, and maintenance by the user, of
Trane Energy Recovery Module. They do
not contain full service procedures necessary
for the continued successful operation of
this equipment. The services of a qualified
technician should be employed through the
medium of a maintenance contract with
a reputable service company. Read this
manual thoroughly before unit start-up.
Warnings and cautions
Warnings and Cautions appear at
appropriate sections throughout this
manual. Your personal safety and the proper
operation of this machine require that you
follow them carefully. The constructor
assumes no liability for installations
or servicing performed by unqualified
personnel.
WARNING!: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION!: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate injury. It
may also be used to alert against unsafe
practices or for equipment or property-
damage-only accidents.
2
© 2011 Trane
General information
Important recommendations
To avoid death, injury, equipment
or property damage, the following
recommendations should be observed
during equipment operation:
1. The units are suitable for ambient air
temperature between -20°C and +70°C
and for air flow temperature between
-20°C and +40°C. Different conditions
need written confirmation from the
manufacturer.
2. The usual measure against frost in coils
and protection against temperatures
have to be secured by the user.
3. Components - Some OEM products
have specific manufacturer's service
instruction documents. These are
delivered inside the unit. In this case,
only the indications in the OEM manual
are valid and the service handbook in
hand has only general character for the
relating components.
4. As fire prevention, fire dampers are to be
provided where ducts cross firebreaks.
Local fire prevention code is to be
observed carefully.
To avoid death, injury, equipment
or property damage, the following
recommendations should be observed
during maintenance and service visits:
1. Disconnect the main power supply before
any servicing on the unit.
2. For inspection on the Air Handling Units
and to avoid risks, the units surroundings
are to be sufficiently lighted.
Reception
On arrival, inspect the unit before signing
the delivery note. In case of visible damage:
The consignee (or the site representative)
must specify any damage on the delivery
note, legibly sign and date the delivery
note, and the truck driver must countersign
it. The consignee (or the site representative)
must notify your local Trane sales office
and send a copy of the delivery note. The
customer (or the site representative) should
send a registered letter to the last carrier
within 3 days of delivery.
Reception in France only:
Concealed damage must be looked for at
delivery and immediately treated as visible
damage.
Reception in all countries except
France:
In case of concealed damage: The consignee
(or the site representative) must send a
registered letter to the last carrier within 7
days of delivery, claiming for the described
damage. A copy of this letter must be sent
to your local Trane sales office.
Warranty
Warranty is based on the general terms
and conditions of the manufacturer. The
warranty is void if the equipment is repaired
or modified without the written approval
of the manufacturer, if the operating limits
are exceeded or if the control system or the
electrical wiring is modified. Damage due
to misuse, lack of maintenance or failure to
comply with the manufacturer's instructions
or recommendations is not covered by the
warranty obligation. If the user does not
conform to the rules of this manual, it may
entail cancellation of warranty and liabilities
by the manufacturer.
RT-SVX42B-E4
Hide quick links:
Advertisement
