Page 1
HANECO LIGHTING EMERGENCY LED EXIT BOX TYPE LIGHT INSTALLATION GUIDE ESODO BOX 24M Thanks for choosing our ESODO BOX 24M EXIT products. We strongly recommend that you read this manual carefully before installation. Product Specifications Product Code Max power IP Rating...
Page 2
3. Bring the main cable in from the knock-out in the middle top. Then mount the base on desired surface. 4. Wire the fitting as illustrated in the diagram below 4. Wire the fitting as illustrated in the diagram below For more information www.haneco.com.au (08) 8297 6373...
Page 3
Cont. Place the fitting back Test the installation in accordance with wiring rules and regulation, Switch on power. For more information www.haneco.com.au (08) 8297 6373...
Page 4
1. Switch-off main power 2. Unlock the mounting base by rotating the locker anticlockwise for 90 degrees. 3. Knock out the cable entry in the middle at back and connect to the mains For more information www.haneco.com.au (08) 8297 6373...
Page 5
Cont. 4. Mount the base on desired surface 5. Replace the fitting and lock For more information www.haneco.com.au (08) 8297 6373...
Page 6
Cont. 6. Test the installation in accordance with wiring rules and regulation, Switch on power. For more information www.haneco.com.au (08) 8297 6373...