Ode Setting; Ault Code And Solutions - R&D COMBI Series Service Manual

9.6
模式设定
Mode setting
按速冷速冻键 ，速冷、速冻 模式按以下方式循环：
冷藏非关闭时，循环设定速冷→速冻→速冷速冻→无→速冷...。
冷藏关闭时，循环设定速冻→无→速冻...。
Press Quick Freezing button, and quick refrigerating and quick freezing. Modes are cycled in the foll
owing way:
When the refrigerating mode is not closed, the mode is set in a circular manner to be quick refrigerating
→ quick freezing → quick refrigerating and freezing →no → quick refrigerating
When the Refrigerating chamber is closed,
→no →quick freezing .
设定速冷模式时，冷藏自动设定 2℃；退出速冷模式时，冷藏室设定温度自动恢复到速冷模式之前的
设定温度。
设定速冻模式时，冷冻自动设定-24℃；退出速冻模式时，冷冻室设定温度自动恢复到速冻模式之前的
设定温度。
Press Quick Freezing button, and quick refrigerating and quick freezing. Modes are cycled in the following
way:
When the refrigerating mode is not closed, the mode is set in a circular manner to be quick refrigerating →
quick freezing → quick refrigerating and freezing →no → quick refrigerating ....
When the quick refrigerating mode is set, the refrigerating temperature is automatically set to 2°C; when the
quick refrigerating mode is exited, the refrigerating chamber setting temperature will automatically return to the
preset temperature before the quick refrigerating mode.
When the freezing mode is set, the freezing temperature is automatically set to -24°C. When the quick freezing
mode is exited, the freezing chamber setting temperature will automatically return to the preset temperature before
the quick freezing mode.
9.7
故障代码及解决方法
故 障
故障内容
代码
冷藏室温度传感器故
E1
障
冷冻室温度传感器故
E2
障
the mode is set in a circular manner to be quick freezing
Fault code and solutions
代 码
维修方法步骤
可见
步骤 1：检查端子 CN1 是否插到位，拔出端子重
新插到位
步骤 2：检查端子上是否有异物，拔出冷藏传感
是
器，对照 10.5 阻值表，检查传感器是否正常。
步骤 3：更换主控板
步骤 4：更换电气接线主线束
步骤 1：检查端子 CN1 是否插到位，拔出端子重
是 新插到位
步骤 2：检查端子上是否有异物，拔出冷冻传感
40