R&D COMBI Series Service Manual page 35

1） Remove fixing screws in the box cover of
main control board with a cross screwdriver;
2） Remove the box cover of main control
board;
3） Pull up the harness terminal and remove the
main control board;
4） Replace the main control board and plug in
terminal (with misplug prevention design)
and cover box cover to complete
1. 电源 AC230V
2. 变频板
3. 冷冻化霜加热器
4. 冷藏化霜加热器
5. 翻转梁加热丝
6. 左冷藏门开关
7. 变温传感器
9. 右冷藏门开关
10. 冷冻化霜传感器
11. 冷冻传感器
12. 冷藏化霜传感器
13. 冷藏传感器
1. Power supply AC230V
2. Variable frequency driver board
3. Freezing defrost heater
4. Refrigeration defrost heater
5. Flipping beam heating wire
6. Left refrigeration door switch
7.
9. Right refrigeration door switch10. freezing defrost sensor
11. freezing sensor
12. refrigeration defrost sensor
13. refrigeration sensor
14. Temperature sensor
35