Page 1
Quick Start Guide AERAMAX PRO AM3 ® AM3S...
Page 2
This guide is for machine set-up. For full installation guidelines, please refer to the product documentation that came with the unit, or visit http:/ /support.fellowes.com...
Setting up your air purifier Open unit fully by pressing latches on both sides. If locked, insert key and rotate counterclockwise ¼. » » 4 | Setting Up...
Page 5
Remove all filters from plastic. Check that the Velcro on Arrange filters in proper order. HEPA is placed first in the » » the carbon filter is facing out. Attach pre-filter to the Velcro frame. Carbon on top of HEPA. Pre-filter on top of Carbon, strips in each corner of the carbon filter.
Page 6
Place filter assembly back into unit. White sticker on top Close front panel until you hear a click. » » and white pre-filter in front. 6 | Setting Up...
Getting started FLOOR UNITS ONLY: Plug into an outlet and ensure the Once the floor or wall unit is powered up, open front panel » » power switch located at the bottom rear of the unit next to to adjust settings. the power cord is switched to the on position.
Page 8
» There are two settings, normal and quiet mode. Unit is » To select quiet mode, hold down the fan icon on the defaulted to normal. right for a few seconds until you hear a beep and the icon is illuminated. PlasmaTrue™...
Page 9
» Once settings are complete, insert key on the right side and rotate clockwise ¼ turn to lock machine. AeraMax AM3 | 9...
Page 11
Protect What Matters Most Register your product to the AeraMax Protects Program and receive one additional year of warranty protection as well as filter replacement reminders. Fellowes.com/aeramaxprotects Scan To Register Product...