Page 4
25.6”braided metal bidet hose Protective O-rings...
Page 6
Notice:Observe all local plumbing,electrical and building codes Warning:Use cave to avold cross therading or overtightening the connection overtightening can cause leaking.
Page 7
Notice: This device is designed for connection to a cold water source with a perssure of 20-80 psi.
Page 8
step 6 Place Supplied rubber o-rings under the mounting bracket to protect and secure bidet on the toilet. step 7 step 8...
Page 9
Handle step 9 step 10 If leaking persists,dis coutinue use of the unit,farn off the water source and contact support@biobidet.com...
Page 10
IMPORTANT! Water can spray when no one is sitting on the seat. Do not activate the water until seated. right self cleaning function left OFF function middle Adjust the water pressure control knob, choose the comfortable pressure you want.Note: water pressure control knob does not reset automatically, please turn it off manually.