Modular Support; Modules And Interface Cards Supported - Cisco 2801 Datasheet

Cisco 2800 Series
EMC
TELCOM**

MODULAR SUPPORT

Table 7.

Modules and Interface Cards Supported

Network Module
Ethernet Switching Network Modules
NM-16ESW 16-port 10/100 Cisco EtherSwitch
NM-16ESW-1GIG 16-port 10/100 Cisco EtherSwitch Network Module
with 1 Gigabit Ethernet (1000BASE-T) port
NM-16ESW-PWR 16-port 10/100 Cisco EtherSwitch Network Module
with in-line power support
NM-16ESW-PWR- 16-port 10/100 Cisco EtherSwitch Network Module
1GIG with in-line power and Gigabit Ethernet
NMD-36ESW 36-port 10/100 Cisco EtherSwitch High-Density
Services Module (HDSM)
NMD-36ESW-2GIG 36-port 10/100 Cisco EtherSwitch HDSM with 1
Gigabit Ethernet (1000BASE-T) port
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Cisco 2801
For all four platforms, Telecom compliance standards depend upon country and interface type. Interfaces
comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant
TBR's. For specific information see the datasheet for the specific interface card.
Homologation requirements vary by country and interface type. For specific country information, see the on-
line approvals data base:
http://tools.cisco.com/cse/prdapp/jsp/externalsearch.do?action=externalsearch&page=EXTERNAL_SEARC
H&module=EXTERNAL_SEARCH
®
© 2004 Cisco Systems, Inc. All rights reserved.
Cisco 2811
FCC Part 15
ICES-003 Class A
EN55022 Class A
CISPR22 Class A
AS/NZS 3548 Class A
VCCI Class A
EN 300386
EN61000-3-3
EN61000-3-2
Cisco 2801
Network Module No
No
No
No
No
No
Page 11 of 19
Cisco 2821 Cisco 2851
Cisco 2811 Cisco 2821
No No
No No
Cisco 2851