Dell OptiPlex 7090 Install Manual
Tower cable cover
Hide thumbs
Also See for OptiPlex 7090:
- Service manual (90 pages) ,
- Install manual (8 pages) ,
- Setup and specifications (27 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Dell OptiPlex 7090
Summary of Contents for Dell OptiPlex 7090
- Page 1 OptiPlex 7090 Tower Cable Cover Install Guide May 2021 Rev. A00...
- Page 2 A WARNING indicates a potential for property damage, personal injury, or death. © 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
- Page 3 Contents Chapter 1: Before you begin ......................4 Chapter 2: Dell OptiPlex Tower Cable Cover..................5 Chapter 3: After installing the accessory..................9 Chapter 4: Getting help and contacting Dell.................10 Contents...
-
Page 4: Chapter 1: Before You Begin
Before you begin Steps 1. Save and close all open files and exit all open applications. 2. Shut down your system: Click Start > Power > Shut down . NOTE: If you are using a Linux operating system, see the documentation of your operating system for shut-down instructions. -
Page 5: Chapter 2: Dell Optiplex Tower Cable Cover
Dell OptiPlex Tower Cable Cover The cable cover for the OptiPlex 7090 Tower system protects the ports and organize cables that are connected to the system unit. Steps 1. Follow the instructions in before you begin. NOTE: Images that are shown below may vary depending on your system configuration. - Page 6 3. Align the cable cover retaining hooks into the slots on the OptiPlex 7090 Tower chassis. CAUTION: Take care not to bend or break the delicate plastic hooks. Dell OptiPlex Tower Cable Cover...
- Page 7 4. Gently press down on the cable cover until it clicks into place. 5. Slide the latch to lock the cable cover in place. Dell OptiPlex Tower Cable Cover...
- Page 8 NOTE: For added security, use the Kensington cable lock to secure the system unit. Dell OptiPlex Tower Cable Cover...
-
Page 9: Chapter 3: After Installing The Accessory
After installing the accessory Steps 1. Replace all screws and ensure that no stray screws remain. 2. Connect any external devices, peripherals, or cables you removed before working on your system. 3. Connect your system and all attached devices to their electrical outlets. 4. -
Page 10: Chapter 4: Getting Help And Contacting Dell
Getting help and contacting Dell Self-help resources You can get information and help on Dell products and services using these self-help resources: Table 1. Self-help resources Self-help resources Resource location Information about Dell products and services www.dell.com My Dell app...