Audio Connections - Behringer GUITAR LINK UCG102 User Manual

27 GUITAR LINK UCG102 User Manual
Connect your headphones to the PHONES connector on
the UCG102.
If you don't want to use your headphones, you can also
connect a pair of active monitors to the PHONES connector—
the Behringer MONITOR SPEAKERS Series, MS16, MS20, MS40,
B2030A or B2031A are perfect choices for this application.

4. Audio Connections

With the integrated USB interface, you can change your
computer to an ultimate recording studio. Whether you
rehearse at home or in the studio, the used audio connections
always remain the same.
4.1 Wiring
You connect the UCG102 to your guitar via a standard
instrument cable.
tip
signal
sleeve
ground/shield
tip
sleeve
strain relief clamp
strain relief clamp
sleeve
tip
sleeve
ground/shield
tip
signal
Fig. 4.1: Unbalanced instrument cable with ¼" TS connector