TP-Link Powerline TL-WPA8631P Installation Manual page 5

Installation
Create a Secure Powerline Network by
Pairing
Note: You can only pair two devices at a time. We recommend plugging in the
powerline devices near each other when pairing.
 Press the pair button on the adapter for 1 second. The Powerline LED will
start blinking. If the Power LED does not blink, press the pair button again.
 Within 2 minutes, press the extender's pair button for 1 second. The Power
LED will start blinking.
 When the extender's Powerline LED turns on, a powerline network has
been successfully created.
Air Broadband Ltd. Registered Office: The Old Sunday School, Chapel St, Waterbeach, Cambridge, CB25 9HR
Company Number 08597161. Email:sales@airbroadband.co.uk. Phone: 01223 653 400