ViewSonic LD108-122 Quick Start Manual page 16

III. Packing and Handling Operation
1. Ensure that the LED display is OFF, and the Accessories box is placed in the grid cor-
responding to the Bottom plate of the flight case. The Bottom plate of the flight case,
which shall be close to the ground, is clipped into the base of the screen from the
position of the front as shown below.
2. Power On the display and press the 1 key on the control box at the base, or continu-
ously hold the "Down" key, to lower the screen to the lowest position until it is inside
the cart slot, as shown below:
16