Hitachi 42HDF52 Service Manual page 9

1.
2.
3.
4.
5.
6. (Continued from previous page)
7. Press the SLEEP button on the remote three (3) times. A new
line will appear below Color Temperature which co-
responds to whatever color temp had been selected in the pre-
vious step.
until Cool Adj.
8. Scroll or
Press the SEL button on remote. The Red, Green , and Blue
9.
parameters will appear.
10. Use or and
measured on the screen is within the specs shown in Table 1.
Notes:
2. Depending on which temperature is being adjusted. Could be any of the following:
Cool Adj.
Natural Adj.
Warm Adj.
Black/White Adj.
Video
Cool Adj.
Red
Green
Blue
(Instruction)
2
is high-lighted.
or until the actual color temperature as
Video
Natural Adj.
255 Red
194 Green
252 Blue
Sample values of the different color temperature parameters
(Remote)
SLEEP
SLEEP
SLEEP
SEL
Video
Warm Adj.
255 Red
166 Green
202 Blue
9
(OSD)
Video
Color Temperature
Video
Color Temperature
Cool Adj.
Video
Color Temperature
Cool Adj.
Video
Cool Adj.
Red 255
Green 194
Blue 252
Video
Black/White Adj.
255 Red
151 Green
138 Blue
42HDF52
Cool
Cool
Cool
255
136
109