Philips 47PFL5403 Service Manual page 12

EN 12 4. LC8.2A LA
3
OPTIONAL
3
4.3.9 Direct Frame Insertion (DFI) Panel
Refer to next figures or details.
1. Mark LVDS connectors [1] feeding the display, preventing
mixing up during re-assembly.
Caution: be careful, as these are very fragile connectors!
2. Unplug the LVDS connectors [1] [2].
3. Unplug the connector [3].
4. Remove the screws [4].
5. The DFI panel can now be taken out of the set.
4 4
1
4
Figure 4-14 DFI Panel
Mechanical Instructions
1
1
2
( )
3x
2
( )
4x
3
Figure 4-13 Small Signal Board
4
1 2
3
4 4
I_17760_044.eps
3
5
3
4.3.10 LCD Panel
Refer to next figures for details.
1. Remove the stand.
2. Unplug the LVDS connector(s) [1] and remove the
adhesive tape [1a].
Caution: be careful, as this is a very fragile connector!
3. Unplug the connectors [2].
4. Remove the fixation screws [3] from rim.
5. Take the rim from the set.
6. Remove the fixation screws [4] and [5].
7. Lift the subframe from the set.
8. The LCD panel can now be lifted from the front cabinet.
030308
3
4 4 4
4 4 4
4 4
3
I_17760_043.eps
6
030308