Honeywell QX Installation Instruction page 4

Inserting a Mother Board
Inserting a new Mother Board is simply the reverse operation.

Drop the new Mother Board into the board guides and push it down until it is fully plugged into the processor
board.

Reconnect the speaker cable.

Carefully slide all the boards back into the recorder ensuring that the connectors mate correctly with the Mother
Board.

Tighten the screws that retain the boards.

Slide the case back over the recorder assembly, ensuring that the rear connectors are aligned with the slots in
the rear panel.

Refit the 4 screws that fix the case to the recorder.
QX torque setting should be 0.5 - 0.75Nm/4.4 - 6.6lbf-in
SX torque setting should be 0.5 - 0.70Nm/4.4 - 6.2lbf-in
Copyrighted Materials. For more information please contact your supplier.
43-TV-33-59 iss.2 GLO Jan 21 UK 4