Wieland wienet IOТ SK DIO8-3G-W Quick Start Manual page 4

Quick start guide (translation from original)
wienet IoT-Gateway Starterkit
IOT SK 100-DIO8-3G-W
Quick start guide
1 Commissioning
To establish a network connection, your PC must be in the same network as the IoT gate-
way.
Variant 1 Standard:
1. Connect your PC to the IoT gateway via Ethernet cable.
2. Set the IP address of network adapter manually on the PC.
IP address: 192.168.1.100-250
Variant 2: wienet IoT IP-Tool
Download the wienet IoT IP-Tool from http://wie.li/iioten
1. Connect your PC to the IoT gateway via Ethernet cable.
2. Open the tool.
▷ Your IoT gateway is now displayed.
You can change the IP address of the gateway directly in the wienet IoT IP-Tool and thus in-
tegrate the gateway into your network.
3. Enter the new IP address and, if necessary, the new network mask and the gateway IP
address. Click on Configure.
Username: admin Password: wienet123
▷ After successful configuration, your IoT gateway has the IP address you specified.
4. Click the HTTP button to open the web interface of the IoT gateway.
2 Change user password
After successful login to the web interface of the wienet IoT gateway, you must change the
password first.
Default: Username: admin Password: wienet123
Enter your new password according to the guidelines and follow the instructions.
3 Communication with the wienetCloud portal
To communicate successfully with the server, follow the steps below.
a. Connecting to the internet with IoT gateway
1. Go to the web interface of the IoT gateway.
2. Go via the Settings icon to Settings and then to Network. Select according to your IoT
gateway type Ethernet, WLAN or Cellular Modem.
Ethernet: Set the Ethernet interface to DHCP. Click OK and reboot the system. Con-
•
nect the corresponding port to the internet via an Ethernet cable with a gateway.
WLAN: In the Network Settings, select Use DHCP. To scan for WLAN, click the
•
Search button. Select the correct WLAN and enter the encryption key. Click OK and
reboot the gateway.
Cellular modem: Go to Cellular modem and select Enable cellular modem. Then
•
enter the SIM PIN and the APN. Click OK and reboot the system.
3. To test the internet connection, click on the Diagnose icon and select the Ping tab.
Enter the following IP address under Host: 172.217.16.131 (google.de)
4. Click Start.
Doc. # BA001202 – 11/2020 (Rev. B)
83.041.1011.0
Network mask: 255.255.255.0
and install the tool.
wienet IOT SK 100-DIO8-3G-W
Wieland Electric GmbH
Brennerstraße 10 – 14
96052 Bamberg
Phone +49 951 9324-0
Fax +49 951 9324-198
info@wieland-electric.com
www.wieland-electric.com
b. Customer registration wienetCloud
Go to https://www.iot.wienet.cloud/register
the wienetCloud portal. After checking your data, your portal access will be activated
within 24 hours and you can log in.
c. Create Project
After successfully activating your customer administrator, you must create a project. For
this click on the button „Create a project"
d. Activate Gateway
1. To activate an IoT gateway, you must login to the corresponding project, step 3c. The
URL of your project is https://your_projectname.iot.wienet.cloud. Registration data is
that of your customer administrator.
2. In the View window, go to the Gateway tab. Select Activate Gateway.
3. Select your IoT gateway type and enter the MAC address of the IoT gateway.
4. Fill in the following fields: Scope, Username and Password.
Remember this information well or note it!
5. To activate the IoT gateway, click on ORDER AND ACTIVATE WITH COSTS. There are no
costs for the Starter kits, as one year of cloud access is included.
6. Go back to the web interface of the IoT Gateway.
7. Go via the Settings icon to Settings and then to wienetCloud.
8. Fill in the following fields: Host, Project, Scope, Username and Password. This Infor-
mation must match the information you provided in the wienetCloud.
9. Click OK and reboot the gateway.
Reboot
Under Settings >Event log, you can track the status of the connection and possible errors.
After the successful connection, your IoT gateway is highlighted green in the wienetCloud
portal.
and register your customer administrator for
EN