Cylinder Head, Valves And Oil Pan - Kubota WG972-E2 Workshop Manual

WG972-E2, DF972-E2, WSM

(3) Cylinder Head, Valves and Oil Pan

Ignition Coil and Spark Plug
1. Disconnect the plug cap (1).
2. Disconnect the connector of ignition coil (3).
3. Remove the ignition coil (2).
A : for No. 1 cylinder
B : for No. 2 cylinder
C : for No. 3 cylinder
4. Remove the spark plug (4).
(1) Plug Cap
(2) Ignition Coil
Cylinder Head Cover
1. Remove the head cover screws (1).
2. Remove the cylinder head cover (2).
3. Remove the intake manifold (3).
(When reassembling)
• Check to see if the cylinder head cover gasket is not defective.
Tightening torque Cylinder head cover screw
(1) Head Cover Screws
(2) Cylinder Head Cover
S-37
GASOLINE / LPG ENGINE
(3) Ignition Coil Connector
(4) Spark Plug
W1078106
6.86 to 11.3 N·m
0.7 to 1.15 kgf·m
5.1 to 8.3 ft-lbs
(3) Intake Manifold
W1049737
KiSC issued 01, 2006 A