Dell Inspiron 5405 Service Manual page 65

Table 5. System setup options—Advanced menu (continued)
Advanced
USB Wake Support
SATA Operation
Adapter Warnings
Function Key Behavior
Keyboard Illumination
Keyboard Backlight with AC
Keyboard Backlight with Battery
Express Charge
Battery Health
Camera
Battery Charge Configuration
Advanced Battery Charge Configuration
Sleep Mode
Maintenance
Allows you to enable USB devices to wake the computer
from standby or to disable the USB wake support feature.
NOTE: If USB PowerShare is enabled, a device
connected to the USB PowerShare connector may not
wake the computer.
NOTE: To enable wake support for the fingerprint reader
the USB Wake Support needs to be enabled in the BIOS.
To enable USB wake support, complete the steps in the
knowledge base article 000131547.
Default: Disabled
Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Default: AHCI
Allows you to choose if the computer should display warning
messages when you use AC adapters that are not supported
by your computer.
Default: Enabled
Allows you to set function key or multimedia key as the
default function key behavior.
Default: Multimedia key
Selects the operating mode of the keyboard illumination
feature.
Default: Bright
Selects the timeout value for the keyboard backlight when an
AC adapter is plugged into the computer.
Default: 1 minute
Selects the timeout value for the keyboard backlight when
the computer is running on battery power.
Default: 1 minute
Selects the battery charge mode.
Default: Express Charge
Displays the battery health.
Enables or disables the camera.
Default: Disabled
Set the battery charge settings with a preselected custom
charge start and stop.
Default: Adaptive
Enable Advanced Battery Charge Configuration from the
beginning of the day to a specified work period.
Default: Disabled
Selects the power-saving state when your computer is idle.
Default: OS Automatic Selection
System setup 65