Names Of Parts; Main Features - Godo RING72 Instruction Manual

Foreword
Thank you for purchasing!
RING72 is a compact and portable LED ring light, whose light body can be installed
on the camera lens, and the controller can be installed on the camera hot shoe. The
brightness of the L left half and the R right half can be individually adjusted to
accurately obtain the required brightness by adjusting the buttons and knobs of the
controller. It is ideal for portrait shooting, jewelry shooting, insects and plants
shooting, and dental photography etc.
Please read this manual carefully before using to make sure the correct operation
and exert the optimum function. Please keep the instruction manual for future
reference.

Main Features

• Adopt 72 pieces premium LED beads ensure sufficient high-brightness light.
• Eight different adapter rings are included to fit a range of lens diameters from
49mm to 82mm (82mm adapter ring is not included).
• Separately control the brightness of the left/ring half to create side-lite effects.
• Coiled cord connects the ring light to the controller to provide extra convenience.
Warning
Be careful while using to protect it from crashing or falling.
Do not use in the too high or too low temperature environment.
And Do not use in rain or in damp conditions.
Do not use thinner, benzene or other cleaning agents to clean. It is
recommended to use a soft, moisturized cloth for wiping and cleaning this
product.
Store it in a dry, cool and well-ventilated place, if don't not use this product for
long time.
- 09 -

Names of Parts

01. Ring Light
02. L Left Half Light
03. R Right Half Light
04. Coiled Connection
Cord
05. Controller
06. Battery Case
07. Battery Remove
Button
08. Battery
Compartment
09. Cold Shoe
10. Power ON/OFF
11. Left Half Adjustment Knob
12. Right Half Adjustment
Knob
13. L Left Half Light Button
14. R Right Half Light Button
15. Controller Power
Indicator
16. Mounting Ring Buckle
- 10 -