Names of Parts Thank you for purchasing! RING72 is a compact and portable LED ring light, whose light body can be installed on the camera lens, and the controller can be installed on the camera hot shoe. The brightness of the L left half and the R right half can be individually adjusted to accurately obtain the required brightness by adjusting the buttons and knobs of the controller.
What's in the Box Precautions for using lithium battery 1. Avoid short-circuiting the positive and negative poles. 2. As the batteries do not have waterproof function, please take measures of waterproof in rainy or damp environment. 3. Keep the product out of reach of children. 4.
Page 8
How to install the LED light controller on the camera Use LED lights 2.1 Rotate and loosen the knob at the 1. Turn on bottom of the ring light controller. Slide the power switch to "ON" and the LED light will light up. 2.2 Slide the ring light controller base mount and insert it into the hot shoe socket of the 2.
Power on ring light, L left half light button lights up green indicating the L left half brightness is Model RING72 on, turn the left half adjustment knob to adjust Output Power the brightness of the L left half light.
Maintenance FCC Statement • When the flash is working, if an abnormality is found, the power should This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful be turned off immediately to find out the cause.
Warranty Dear customers, as this warranty card is an important certificate to apply for our How to Get the Maintenance Service maintenance service, please fill in the following form in coordination with the seller If maintenance service is needed, you can directly contact the product distributor or and safe-keep it.