Operating The Appliance; Before First Use - Morphy Richards Fusion Instructions Manual

¤
›
fi
4
⁄
·
‹
„
fl
Features
⁄ Lid with finger pad
¤ Spout filter
‹ Concealed element
› 360° connector (concealed)
fi Cordless base unit
fl Cord storage
‡ On/off switch
· Water level indicator x 2 with
illuminating light
‚ Lid release button
„ Concealed element (inside)
‰ Whistle on/off switch

BEFORE FIRST USE

Before using the appliance for the
first time, fill with water, boil and
pour away.

Operating the appliance

1 Wherever possible fill through the
spout, as this helps to free the filter
‚
from limescale build-up.
• The integrated water level indicators
allow you to easily see the amount
of water in the kettle.
• Always ensure that the appliance is
filled until the water is visible
through the level indicator.
• Boil only as much water as you
need as this saves electricity.
2 Place the appliance on the base
unit, ensuring the appliance locates
Off
on to the 360° connector.
‡
• The 360° connector allows the
appliance to be located at any
On
position - ideal for left and right
handed users and convenient
positioning on worktop.
3 Plug in and switch on at the wall
socket.
4 Switch the appliance on. The water
‰
level indicator will light up.
5 When the water boils the appliance
will switch off automatically.
• Depending on the model varient you
have purchased, the kettle will
illuminate and/or whistle to indicate
it has boiled.
• If you are using the appliance for
the first time, pour away the boiled
water and refill.
6 Lift the appliance from the base unit
by the handle ensuring you hold the
appliance level.
• To re-boil, switch to ON again. If the
appliance has just switched off wait
a minute or so before switching it
back on again.
• If you do not put in enough water, or
switch on the appliance when it is
empty, the safety cut-out will switch
off the power automatically. If this
happens, refill and wait a few
minutes for the element to cool,
then use as normal.