Download Print this page

Dell EMC Edge 510 LTE Setup Manual page 5

Networking switch
Hide thumbs Also See for EMC Edge 510 LTE:

Advertisement

1. Connect the two identical antennas (included in the box) to the MAIN and AUX SMA connectors on the back of the Edge.
The GPS antenna (not included) is optional.
NOTE:
An active GPS antenna recommended for an excellent performance. A passive antenna with high gain will work if
the unit/antenna is close to a window.
Figure 1. Connect antennas
2. Remove the small phillips screw on the door for SIM access. Two SIM slots are available. However, only use the lower SIM
slot and insert the SIM card with the contacts facing up until it clicks into place.
NOTE:
Must insert SIM card with the contacts facing up until it clicks into place.
Figure 2. Insert SIM card
3. Connect the power adapter to the AC power outlet. Connect the DC power plug to the DC power port on the Edge unit and
turn the thread on the plug to lock it. When the Edge powers ON, the round indicator light located on the front of the Edge
will illuminate.
NOTE:
Connect the device to a properly wired earth-ground AC power outlet.
Edge 510 LTE
5

Advertisement

loading