Dell EMC Edge 510 LTE Setup Manual page 6

Networking switch

Hide thumbs Also See for EMC Edge 510 LTE:

Figure 3. Connect the power adapter to the AC power outlet

4. Connect the Edge 510 LTE to an available Internet connection. For wired connections, insert the Ethernet cable in either the

GE3 or GE4 ports. For activating LTE, refer to the Configure Edge activation in the Edge 510 LTE

Installation guide. When the WAN is operational, the front indicator light will turn green.

NOTE:

Use ONLY GE1 or GE2 1 Gb Ethernet ports for WAN connection to a laptop or switch.

Figure 4. Connect to Internet

● GE3 or GE4 ports

5. If you received an email from your IT administrator, follow the instructions in the email to complete the Edge activation.

Edge 510 LTE

Table of Contents