Eyolf Trap Quick Start Manual

Trap
Footloop & Ladder
Q31 - Trap R
Q41-O - Trap 1 Black/Red
Q41-Z - Trap 1 Black
Q44-O - Trap 4 Black/Red
Q44-Z - Trap 4 Black
Q52 - Trap 20
Q55 - Trap 50
FIGURE 1
Warning
Working at height and all forms of activity conducted at
height are dangerous and can lead to serious injury or
death.
Improper use of equipment can result in serious injury or
death. It is the responsibility of the user to obtain proper
training in rope techniques and safety prior to any activity
at height and use of such equipment.
This manual is not a do-it-yourself manual, and the
information presented can-not replace proper training and
experience. It is a person's obligation to get adequate
training in appropriate techniques and safety practises.
We have done everything possible to ensure that the
information provided in this manual is accurate at the time
of publication. However, we do not guarantee that this
information will remain up to date, as many products and
techniques change over time.
If you have doubts or difficulty understanding
anything in this manual, please contact us.
Webbing Footloops and ladders
Have been designed for stepping and climbing up. However it is
not a (PPE) per-sonal protective equipment. Use only as
instructed, with a secondary back-up sys-tem and with compati-
ble items of equipment. Check that the safe function of any one
component within a system will not interfere with safe function
of these Foot-loops or Ladders. Miss use can cause problems,
weakness, serious injury or death. Neatness is strength. The
Footloop needs to be clipped onto a hand ascender with a rated
carabineer or quick link. The Ladder needs to be secured with a
rated carabineer onto a solid anchor point or when using the
ladder on a rope secure it with a rope grab. Always keep an eye
out for potential falls as these products are not designed to
withstand high impact forces.
Do not fall in these products!
Safety
Do not alter the product in any way. Any product subjected to a
minor fall should be examined and discarded if there is any sign
of defect or any doubts about safety.
Inspection
Before each use visually inspect to ensure the product is in
serviceable condition and operates correctly. An examination
should be carried out at least every 12 month by a competent
person. These inspections should be recorded paying particular
attention to areas of potentially high wear and sewn joints. See
our info page on PPE Inspection.
When carrying out an inspection pay attention to the next
items (if applicable):
Check the label / marking (visible, age)
Check rope (cuts, burns, wear, chemical marks, dents,
hernias, other damage)
Check stitching (cut, worn, coloured or disordered threads)
Check attachment points (deformation, cracks, wear,
corrosion, marks)
Check O-ring and connectors (deformation, cracks, wear,
corrosion, marks)
Check compatibility of connector
Check condition of protective components
It is essential for safety that equipment is withdrawn from use
immediately should:
Any doubt arise about its condition for safe use or;
Any product subjected to a major fall .