Table of Contents
Advertisement
Quick Links
Install the Equipment Asset Tracker - Battery
(EAT-B Device) for Spotlight users
This installation guide for Verizon Connect customers. If you are a Verizon Connect installation partner, refer
to
Install the Equipment Asset Tracker - Battery (EAT-B Device) using the Reveal Hardware installer app.
This article includes:
•
Device information
•
•
Installing the EAT-B device
•
Device Information
The Equipment Asset Tracker - Battery (EAT-B) device is designed by Verizon Connect for
tracking non-powered assets, such as generators, containers, pumps, and so on.
•
Compact and discreet
•
Easy to conceal
•
Long battery life
•
Replaceable battery
•
Optimized internal antenna design for a strong signal
•
IP67 rated protection against water and dust ingress
Advertisement
Table of Contents
Related Manuals for Verizon AI-110
Summary of Contents for Verizon AI-110
- Page 1 Install the Equipment Asset Tracker - Battery (EAT-B Device) for Spotlight users This installation guide for Verizon Connect customers. If you are a Verizon Connect installation partner, refer Install the Equipment Asset Tracker - Battery (EAT-B Device) using the Reveal Hardware installer app.
- Page 2 • Mounting holes (one on each corner) (1) • Status LEDs for battery, network, and GPS (2) • Status button that wakes the device, runs a status test and sends a report. (3) • Device label with its serial number (SN) and International Mobile Equipment Identity (IMEI) number (4) Preparing for Installation What’s in the box...
- Page 3 Map. You can download Spotlight from the App Store (for iOS devices) or Google Play (for Android devices). Use your Verizon Connect credentials to log in to the app. If you do not have a login, contact your administrator. •...
- Page 4 You need this number later when confirming that the device has connected to Reveal. You can find the serial number on the label on the side of the device. Step 2: Find a good location to mount the device. The device should be mounted in a location with a clear view of the sky and where it does not interfere with the safe operation of the asset, or where it is exposed to road debris or high- pressure water spray that can damage the device.
- Page 5 The asset should be listed in Reveal and Spotlight with the serial number as the asset name. You can search for the asset to confirm that it is successfully connected to Verizon Connect. To check for the device in Spotlight: 1.
- Page 6 1. If the asset is connected, the asset shows on the Map. Assets are represented by square icons. You can also search for the asset in Reveal. • In Reveal, go to Admin > Asset List. • In the Search field, type the device serial number and press Enter. If the asset is connected, it shows in the list.
- Page 7 Step 5: Mount the device Once you have activated and tested the device, you can mount it to the asset. To mount the device: 1. Hold the device in the mounting position. 2. Mark the positions of the four mounting holes. 3.
- Page 8 1. Choose SAVE CHANGES. Device support • Replace the battery pack FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 9 • Reorient or relocate the receiving antenna. • Increase the separation between equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the • receiver is connected. Consult the dealer or install technician for help.