Advertisement
MAINTENANCE & CLEANING
Cleaning the brushbar
Using a crosshead
screwdriver, remove the 3
screws from the belt cover
on the side of the floorhead.
Clear any dirt/debris inside
the brushbar housing.
Changing the belt
Using a crosshead
screwdriver, remove the 3
screws from the belt cover
on the side of the floorhead.
15
Pull to remove the belt
cover and brushbar
location plate. Remove
the belt.
Using a pair of scissors
remove any threads or
hair caught around the
brushbar and end caps
before refitting.
Pull to remove the belt
cover and brushbar
location plate. Remove
the belt.
Lift and separate brushbar
side cover.
Clean any debris from the
cogs. To replace the belt
firstly hook the belt over
the small cog.
Pull the brushbar through
the side cover to remove.
Slide the belt over the
top of the large cog and
rotate the belt and cog
anticlockwise. During
rotation the belt will slide
onto the cog.
support.vax.co.uk
Hide quick links:
Advertisement
