Vax AirTM Lift DRIVE Manual page 11

USING YOUR MACHINE
Using the handle and hose for hard to reach areas
IMPORTANT: Always switch off the machine before connecting or disconnecting the handle.
Remove the handle from the main unit, attach to the hose and attach the chosen accessory.
Using the hard floor adaptor
IMPORTANT: Always check that the adaptor, wheels and brushbar are free from any dirt/debris before use. Do not use the
hard floor adaptor if it has become damaged or worn. Remove any sharp objects from the floor that could become trapped and
may scratch or damage the surface. The hard floor adaptor should be removed to vacuum carpets.
Lie the machine on its back. Hook the curved clips on
the back of the adaptor under the small wheels on the
base of the machine.
Unhook the curved clips
from the small wheels on
the base of the machine.
11
Push the hard floor
adaptor onto the base of
the machine until it clicks
into place.
To remove the adaptor, pull
the front clips to unlock.
support.vax.co.uk