Using The Handheld Vacuum; Using The Floor Vacuum - Easy@Home MD 18418 User Manual

Operation

Using the handheld vacuum

1. Detach the handheld vacuum
To do so, press the release buttons
2
the holder
2. If necessary, attach the appropriate vacuum attachment onto the suction
opening 18
• Use the crevice nozzle
reach.
• Use the upholstery brush
3. Switch on the handheld vacuum by pressing the on/off button
indicator light in the on/off button will glow blue during operation.
4. Pressing the on/off button again to switch off the handheld vacuum.

Using the floor vacuum

1. Make sure the handheld vacuum
vacuum.
To do so, first insert the suction opening
the lower part of the holder and then push the handheld vacuum towards
the back of the holder until it locks into place (see steps 1 and 2 in Fig. D).
2. Make sure the the floor vacuum
27
station .
To do so, pull the floor vacuum up and out of the bracket
23
base of the charging station steady with your foot.
3. Press the on/off button
vacuum (see Fig. F). The indicator light in the on/off button
handheld vacuum will glow blue and the operation lights
vacuum will turn on during operation.
The floor vacuum cleaner will start operation in economy mode, with
reduced suction power and a longer operating time.
Press the ECO button
4. If necessary, press the handle release button
handle to clean hard-to-reach areas (e.g. under a desk) (see Fig. G).
5. Press the on/off button on the handle to switch off the floor vacuum.
6. Place the floor vacuum back onto the charging station.
18
(see Fig. E).
of the handheld vacuum:
20
33
on the handle
34
to change to normal suction mode.
12
from the floor vacuum
4
and lift the handheld vacuum out of
for vacuuming areas that are diffi cult to
21
for cleaning delicate surfaces.
12
is placed in the holder
18 of the handheld vacuum into
1
is removed from the charging
3
35
1
.
2
28
. Hold the
to switch on the floor
13
11
of the floor
to fold down the
13
. The
of the floor
of the