Advertisement
KT-1E– TROUBLESHOOTING
Malfunction
Reasons
-No power.
-Main control goes
-The indicator light
wrong.
doesn't on.
-Fuse is burnt out.
-Panel goes wrong.
-Interfered by power.
-Interfered by
-Out of control.
environment.
-Panel does wrong.
-The fan is stuck.
-Display is normal
-Cooling pad or dust filter
but without wind or
is blocked.
the wind speed is too
-Fan is distorted.
low.
-Main control board goes
wrong.
-Main control board goes
-The motor is out of
wrong.
control.
-Panel goes wrong.
-Water leak of
-Draining valve is loose.
draining valve.
-Synchronous motor is
burnt out.
-Air diffuser doesn't
-Crankshaft is broken off.
run.
-Crankshaft and swing
bar fall off.
-Water drops splash
out of the air
-Water pipe falls off.
diffuser.
NOTE: This trouble shooting is for reference purpose only. If any technical
assistance is needed, please contact your distributor for service / repair.
Remedy / Solutions
-Check the circuit.
-Change the control board.
-Change the fuse.
-Change the panel.
-Power off.
-Remove or keep away from
interference.
-Change the panel.
-Check the cooler fixing hoops
and fan.
-Clean cooling pad or dust filter.
-Change fan.
-Change the main control board.
-Change the main control board.
-Change the panel.
-Screw slightly.
-Change synchronous motor.
-Change crankshaft.
-Fix crankshaft and swing bar
again.
-Check water pipe.
Healthy & Comfortable
Energy-saving & Environment-friendly
Very reliable quality.
Hugh effective cooling area.
Very quiet.
Speed adjustable.
Automatic swing.
Full function remote controller.
Bigger water tank.
No need for compressed air.
No installation, no duct work design.
Easy to use, easy to clean.
Maintenance friendly.
Anti-bacterial device.
Advertisement
