Advertisement
KT-1E –EXPLODED DIAGRAM
KT-1E– OPERATION INSTRUCTION
1. Press "On/ Off" to turn on / turn off the cooler.
2. Press "Cool" button to activate cooling function. Water pump works for
one minute, then fan deliver cooling air.
3. Press "Speed" to select desirable speed (Low, Medium, High).
4. Press "Swing" to enjoy natural cooling air.
5. Press "Timer" for time setting. When power is on, press 'Timer' to set
the time of cooler operation start; if press until "00" appears, the
setting time of cooler operation start is cancelled. When cooler
operation, press "Timer" to select the time of cooler operation
finish, if press until "00" appears, the setting time of cooler
operation finish is cancelled.
6. Water supply
--Clean water must be used.
--Pour water into water inlet on the right side of the unit slowly to
avoid spillage.
--Water inlet on left side can also be used to connect water tap for
automatic water supply.
WARNING
1. If the supply cord is damaged, it must be replaced by the manufacturer of
its service agent or a similarly qualified person in order to avoid any
hazard.
2. This cooler is not intended for use by persons (including) with reduced
physical, sensory or mental capabilities or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
3. Children should be supervised to ensure that they do not play with the
appliance.
Advertisement
