KONWA KT-1E Instruction Manual page 4

KT-1E—CONTROL PANEL AND REMOTE CONTROLLER KT-1E----MAINTENANCE
NOTE:
To ensure the cooler deliver fresh and clean air, regularly change the water
when dirty, clean the filter and the cooling pad.
1) Remove the filter net by unscrewing the screws, then press the lock,
clean the pad. Never use pressurized water, as it may cause damage to the
pad.
2) Clean the pad from the inner-side to out-side of pad (inner side is
towards motor). Never use any liquid detergent.
3) Unscrew the drainage lid to let dirty water flow out, then clean the water
tank thoroughly with soft cloth. Wash off dirt on the water sensor, water
pump and the float valve.
4) Use mild soap and soft clean cloth when cleaning the cooler casing.
Do not use any caustic chemical detergent that may cause damage to the
surface of cooler.