Advertisement
Attaching Cylinders to the SMS100
Provided with each SMS100 complete harness is the hardware to support two
sidemounted tanks.
This includes the following (image below):
• SS Cam Bands – Qty 2
• SS Tri-Glides – Qty 2
• SS Bolt Snaps 4.5" – Qty 4
• Nylon Line (secures bolt snap to tank)
The image to the right shows how to secure the hardware
properly. The top bolt snap is considered a "safety clip"
or a redundant point of attachment in addition to the
bungee which wraps around the tank valve. This clip
connects to the shoulder D-ring on both the left and
right side of SMS harness. The lower clip is secured using
the Cam Band and Tri Glide and connects to the appropriate
rail on the buttplate. Cam bands on both tanks should be
roughly ¾ the way down the tank as shown in the image.
*Note: This is only a suggestion on how to configure your SMS100 Regulator Kit.
There are other configurations that you may find better suit your diving preference **
Advertisement
