Download Print this page

Hollis S.M.S.100 Harness User Manual page 5

Advertisement

Overview
The SMS100 Sidemount system was designed not just with the sidemount cave divers in
mind, but any diver. Whether you are a beginner, advanced or technical diver, this kit
was designed for you. Kit comes pre-assembled making configuration much easier. The
SMS100 is suitable for side mounting twin or single cylinders, but also for use with
rebreathers or rear mounted singles. This system can be used in any environment from
open water to overhead.
Sidemount Diving Advantages:
• Greater Safety – Allows full visibility over system. Diver can perform gas
checks/management, configure and monitors all of gauges, valves and hoses without
assistance
• Reduces additional gear – Backplate / Doubles bands / Hardware / Manifold - Benefit
when traveling
• Aids in transporting gear to and from the beach or boat – both tanks and one tank at a
time. This includes exiting the water on a boat dive
• Streamlines profile which in turn reduces drag and energy which increases your bottom
time
System Details:
• Streamlined design for reduced drag and passing through tight areas
• Bulletproof Construction
• Single or Dual wing options available
• Central and uppermost located elbow to avoid overhead interference
• Upper & Lower cam band slots for rear mounted single tank
• Adjustable elastic bungee system (also removable)
Specifications:
• 1000 Denier CorduraTM w/ PU lamination outer shell & 15mm urethane internal
bladder
• 360 Degree wing - 52 lbs (231N) Lift
• Lower left pull relief valve on SMS100 wing + Lower right on SMS100D wing

Advertisement

loading

Related Products for Hollis S.M.S.100 Harness