Advertisement
Understanding the SMS100 Harness
1.
Shoulder Webbing woven through wing slots - Long to support shoulder weights
2.
1" D-rings on for bungee attachment – Top D-rings are preferred placement
3.
Embroidered Hollis logo
4.
SMS100 Wing - 52 lbs. lift - 360 Degree wing
5.
Alternate mounting points for rail system
6.
Rear mounted 2" D-ring for attaching accessories
7.
Rail system used to attach sidemounted cylinders
8.
1" D-rings for attachment of canister light assembly
9.
Tank Bungee for holding cylinder close to the diver – use top d-ring for best trim
10.
Cam Strap slots for securing a single cylinder if needed
*Note: This is only a suggestion on how to configure your SMS100 Regulator Kit.
There are other configurations that you may find better suit your diving preference *
Advertisement
