VTech Get Ready for School Learning Desk Instruction Manual page 4

ASSEMBLY INSTRUCTIONS
With the Get Ready for School Learning Desk™ safety comes first.
To ensure your child's safety, adult assembly is required.
For the Desk
1. Place the base on a flat surface. Insert the touch panel into the base and
press down on the hinges until you hear a click. Flip the touch panel down.
Caution: Do not place too much pressure directly on the touch panel.
1
Hinge
3
2. Fully insert the four desk legs into the
slots on the bottom of the base.
For the Stool
Hinge
Base
Insert the four stool legs into the slots on the bottom of
the stool seat. Please make sure to fully insert the legs into
the seat to ensure the stool is stable. Always make sure
all four legs are fully inserted before your child sits on the
seat. The recommended weight limit of the stool should
not exceed 75 pounds.
2
4
Touch Panel
5
3