VTech Get Ready for School Learning Desk Instruction Manual page 11

Projector Game
the Activity Page. Turn the Projection Reel to the left or right to
display another image.
If the Projector Game quits while playing another activity, touch
the Projection Reel Mode icon
Projection Reel to re-start.
To quit the Projector Games:
• remove the Projection Reel from the Projector Reel Slot.
• or flip down the Projector.
• or touch any of the Mode Icons in the Activity Page to play other
activities.
NOTE
• When the Projection Reels are not in use, place them back in the
Reel Rack.
• Do not insert anything other than the Projection Reels into the
Projector Reel Slot. Otherwise, it will damage the Projector.
• Keep the film area of the Projection Reels clean and do not damage
the film with sharp objects.
• To ensure the projection image is visible, do not use in a bright area.
• If the projection image is not centered on the desk top, turn the
Projection Reel to center it.
• If the projection image is not clear, slide the Projection Focus
Adjustor to adjust the image.
• If the Projector does not light up, turn or re-insert the Projection
Reel.
• To ensure the projected images and related activities are properly
working, fully insert the Projection Reels into the Projector.
• The Touch Panel (except the Help icon) will not be responsive to
touch while playing Picture Tracing activity.
• The Writing Pad (except the Arrow buttons) will not be responsive
to the Stylus while playing the Picture Tracing activity.
10
To play in Projector Game mode,open
the projector and insert a red or blue
projector reel into the Projector Reel
Slot. Insert the corresponding color
matched Activity Page in the Activity
Card Slot (i.e. the red framed Shapes &
Colors Activity Page should match to
the red projector reel). The Projector
will light up and display an image onto
on the Activity Page or turn the