Philips ME5P Service Manual page 54

54 ME5P 23"
Go to cover page
2. Press the Load hex then select the HEX CODE
as shown in Fig. 8.
Fig. 8
3 Press the AUTO to running program , the firmware be
updated as shown in Fig. 9.
4 Press the file --> exit to end program , as shown in Fig. 10.
Access factory. Mode to confirm the version
Step 1 : Select the source "PC" and then turn off LCD-TV.
Step 2 : [Push "power " button and then push the "VOL- " and "VOL+"
buttons at the same time immediately and hold it] about five seconds
then release all buttons.
Press "menu"button and bring up factory mode indication as shown in
following
MAIN CONTROLS
PICTURE
AUDIO
FEATURES
INSTALL
ME5P NAFTA23 V2.00 050809C QDI23 QD23HL02
ISP INSTRUCTIONS
Fig.9
Fig. 10
1024X768
@60HZ @60HZ
SMART PICTURE
BRIGHTNESS
CONTRAST
AUTO ADJUST
MANUAL ADJUST
If there is a warring message coming as shown in Fig 11. , you
have to check the AC power, Video cable, or Novatek MCU.
Fig. 11