Philips ME5P Service Manual page 17

GENERAL PRODUCT SPECIFICATION
Signal source
3.3.3.2 TV Signal type
RF signal
Video signal : Video( RCA CVBS input) / 1Vpp (300mV-sync, 700mV-video.)
S video input / 1VppY-signal, 300mVpp C-signal
COMP Video(YPbPr input)/ 1Vpp Y signal, 350mVpp Pb,Pr signal
DVI : Digital interface with 4 channels TMDS signal
Audio signal : Audio (1) R/L for AV IN1 (Video1 and S-video).
Level: Nominal
Maximum : 1.5 V rms.
Impedance > 10 k ohm.
Audio (2) R/L for AV IN3 (Video2 and Comp video).
Level: Nominal
Maximum : 1.5 V rms.
Impedance > 10 k ohm.
Audio (3) R/L for DVI IN.
Level: Nominal
Maximum : 1.5 V rms.
Impedance > 10 k ohm.
3.3.3.3 PVR output (CVBS output)
Video: CVBS output 1Vpp / Impedance : 75ohm.
Audio: R/L output (from CVBS)
Level: Nominal
Maximum : 1.5 V rms.
Impedance < 1 k ?
3.4 Power input connection
Power cord length
Power cord type
3.5 Power management
PC mode
The power consumption and the status indication of the set
with power management function are as follows:
23 " Wide LCD Monitor/TV
BRAND: PHILIPS
2005-07-01
Yikuan YU
: pattern generator format as attachment. (table 1 to 6 )
Reference generator: CHROMA 2200 or 2250
: Aerial input / 10mV(80dBuV)
: 0.5 V rms.
: 0.5 V rms.
: 0.5 V rms.
: 0.5 V rms.
: 1.8 M
: 3 leads power cord with protective earth plug.
25
2005-07-01
Go to cover page
Power Spec
590
15
Me5P 15" & 20"
17
ME5P 23"