EEG A1452 Product Manual page 8

A1452 SCTE-104 Inserter Frame Card
There are two main sections in the DashBoard interface: the Status in-
formation on the left side and the Setup menu on the right side. At the
bottom of the interface, you will find the Upload button, which can be
used to upgrade your A1452's DashBoard interface firmware, and the
Reboot button, which can be used to reboot your A1452.
The upper section on the left shows the Card State and the Connection
status, each of which has an indicator light and description of the card's
status. There is a more detailed tab labeled Status Information below
the two basic indicators that provides information about the card's ver-
sion and its current setup configurations.
The System Status section shows what video types are present and
the current status of the Ethernet connection. Output Status displays
the mode that the encoder is operating in; the icon will be green when
the unit is in active operating mode and will be red when the Encoder
is in Relay Bypass mode. Master Input Format displays the video type
7