System - EEG A1452 Product Manual

3.2.1 System

The System tab contains the address settings the unit will use when con-
nected to a local network, as well as control of the relay-bypass mecha-
nism.
Insertion
IP Address
Subnet Mask
Gateway
A1452 SCTE-104 Inserter Frame Card
Selects the operating mode of the frame card and
specifies whether data is being inserted.
Selects the network address that the unit will be
assigned on your LAN.
Selects the bit mask used. This should match the
bit mask used on your LAN.
Selects the address of the computer or device that
the unit will use to communicate outside of your
local network, when applicable.
9