EEG HD1430 Product Manual page 29

HD1430 HD Encoder Frame Card
not the Encoder is receiving an SD video signal.
Report Switch Setting:
<CTRL+A>S <ENTER>
Returns the current setting of the ENCODER ON bypass switch.
Monitor Line 21:
<CTRL+A>5 [Channel] [I/O] <ENTER>
End Monitoring:
<CTRL+C>
Monitors and displays the EIA–608B caption data encoded in the speci-
fied channel. The I/O parameter determines whether the incoming (en-
ter as I) or outgoing (O) data is monitored. The default settings are
incoming and CC1.
28