Carton Inventory
Your garage door opener is packaged in one carton
which contains the motor unit and the parts illustrated
below. Note that accessories will depend on the
model purchased. If anything is missing, carefully
check the packing material. Parts may be stuck in the
Multi-Function
Door Control Panel
Trolley
Cable Pulley
Bracket
Light Lens (2)
Safety Sensor
Bracket (2)
Model PD600 (1)
Model PD600-2K (2)
SECURITY
Multi-Function
Remote Control Transmitter
Rail Brace (3)
Chain and Cable in
Dispensing Carton
Hanging Brackets
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White & White/Black
Bell Wire attached
Safety Labels
and
Literature
foam. Hardware for assembly and installation is
shown on the next page. Save the carton and
packing material until installation and adjustment is
complete.
Model PD600-2K ONLY
SECURITY
Keyless Entry
T-Rail
End Section (2)
Header Bracket Plus
Clevis Pin and Fastener
Sprocket Cover
6
2 Conductor Bell Wire
White & White/Red
T-Rail
Center Section (2)
Door Bracket
Straight Door
Arm Section
Curved Door
Arm Section