Acer AMR030 Quick Start Manual page 2

Package Contents

• Bluetooth & Wireless mouse x 1

• Quick start guide x 1

Device Overview

1. Left button

2. Scroll wheel (3D)

3. Right button

4. Nano USB receiver

5. LED indicator

6. Optical sensor

7. Bluetooth button (mode switch)

8. USB receiver holder

9. Battery compartments

Turn the mouse on

1. Open the battery compartment cover at the back of the mouse.

2. Install 2 AAA batteries into the battery compartments.

3. Replace the cover.

4. The mouse is automatically ON.

WARNING

Make sure that the positive and negative ends are positioned correctly as labeled on the battery compartment.

Connect your mouse

• Using the Nano USB receiver

Plug the Nano USB receiver into your computer's USB Type-A port. Now you are ready to use

the mouse.

NOTE

It's Plug & Play connectivity, no drivers required. Make sure the distance between your computer and

mouse is within 10 meters.

• Pairing your mouse with Bluetooth

1. Press and hold the Bluetooth button at the back of your mouse for 2 seconds to switch to

Bluetooth mode and start the initial pairing process. Press and hold the Bluetooth button for

5 seconds will start the pairing process again (or pairing with new device).

2. The LED starts to flash blue indicating that the mouse is in Bluetooth mode and ready to pair.

3. Start the Bluetooth pairing wizard on your computer and follow the instructions.

NOTE

- Once your mouse is paired successfully, you do not need to pair it again when using the mouse next time.

- If the pairing is unsuccessfully, your mouse will enter Sleep mode after flashing blue about 3 minutes.

Please repeat step 1-3 above to restart the pairing process.

• Warranty booklet x 1

• Battery x 2