Cleaning; Declaration Of Conformity - Delta essentials GT-DR-01 Instruction Manual

Adding the water
1. Remove the plug from the wall socket.
2. Activate the steam button to clear the pressure of the appliance. Keep the button
pressed until no more steam comes out of the appliance.
3. Place a cloth over the tank cap because the cap heats up when the appliance is in use
for a certain length of time. At times, it is possible that the steam will continue to come
out of the opening.
4. Press the button, then turn it anti-clockwise to remove it. Proceed as specified under‚
"Adding the water", page 10.
After use
DANGER
The floor nozzle cloth (only when the floor nozzle is in use) heats up considerably.
Let cool before removing after use.
1. Remove the plug from the wall socket.
2. Let the appliance cool down before putting it away or cleaning it.

Cleaning

DANGER
- Never immerse the appliance, the plug or the power cable in water or any other
liquid. Electrocution risk!
- Remove the plug from the wall socket prior to cleaning the appliance.
- The appliance is extremely hot after use. Wait a few minutes before cleaning it.
Remove the plug from the wall socket and allow the appliance to cool down entirely.
Drying the housing and the accessories
Clean the housing and the accessories with a slightly damp cloth.
Washing the cloth
The floor nozzle cloth may be washed in the washing machine at 60° (refer to the label).

Declaration of conformity

The conformity of this product with the regulations stated by law is ensured. You will find
the complete declaration of conformity on the following website www.gt-support.de.
HELPLINE No. U K / N.IRELAND 0800 328 60 20 REP. IRELAND 00 800 44 67 58 88
WEB SUPPORT info@dariolondon.com
14 Model Number: GT-DR-01