First Set Up; Use - Delta essentials GT-DR-01 Instruction Manual

First set up

Unpacking and control
1. Take out all parts from the packaging and remove the transport packaging.
2. Check if all the parts are to be present and intact, please refer to the overview of parts,
page 9.
3. Select the desired accessories and assemble them in conformity with the following
chapter.
Adding the water
DANGER
Remove the plug from the wall socket before filling up the water tank.
WARNING
Only fill the tank with water, do not use any alcohol, vinegar, descaler, detergent
or any other products.
If the water is particularly hard (your drinking water supplier will be able to inform
you), we recommend using distilled water.

Use

Preliminary cleaning
Sometimes a preliminary cleaning of the appliance will be required.
Hoover or sweep away any crumbs or particles prior to using the steam cleaner.
Strong and/or stubborn stains should be pre-treated with lemon, vinegar or a decaling
product on the surface to be steam treated.
Never add such treatments to the water tank!
HELPLINE No. U K / N.IRELAND 0800 328 60 20 REP. IRELAND 00 800 44 67 58 88
WEB SUPPORT info@dariolondon.com
10 Model Number: GT-DR-01
1. Push the cap and turn it anti-clockwise to
remove it.
2. Put the funnel into the tank opening.
3. Add 250 ml of fresh clean water to the max level
in the tank (about 1.5 beakerfuls).
Do not overfill the tank!
4. Replace the cap.