Download Print this page

Cetacea Sound CARTENS2 Quick Start Manual

Cart surround ensemble

Advertisement

Quick Links

QUICK START GUIDE
CART SURROUND ENSEMBLE
Model Nos. "CARTENS2 and CARTENS3"
These instructions present ideas on how to mount the Cart Surround
Ensemble products (CSENS) to a video cart.
These products can be mounted close to a video monitor because they are
shielded.
These powered CSENS speakers are capable of filling 1,000 square foot
rooms with highly intelligible and distortion-free sound when mounted
correctly. For larger rooms use two or more CSENS speakers.
Cart Installation:
WARRANTY: Do not remove the CSENS speakers from
their brackets or try to mount them to brackets that are
not approved by Cetacea Sound Corp.
Removing the bottom heat sink from any CSENS or
Ensemble product will invalidate the warranty. To find
out which brackets are approved, please call us at 800-
556-1922 and ask for Tech Support. You may also visit
our web site.
Cetacea Sound Corp assumes no
LIMITED LIABILITY:
liability for the use of unapproved brackets.
Read these instructions closely.
OVER
5RMF-CARTENS(2)(3).doc

Advertisement

loading

Summary of Contents for Cetacea Sound CARTENS2

  • Page 1 QUICK START GUIDE CART SURROUND ENSEMBLE Model Nos. “CARTENS2 and CARTENS3” These instructions present ideas on how to mount the Cart Surround Ensemble products (CSENS) to a video cart. These products can be mounted close to a video monitor because they are shielded.
  • Page 2 “JAZZ”, “ROCK”, “BLUES”, etc., turn them off! These artificial special effects cause distortion and frequency compression. The CSENS speakers require power from the Cetacea Sound Corp approved “Power Adapter/Conditioner”. Plug the power adapter into a suitable source of 110/220v power. Plug the small 5.5mm barrel connector into the base of the CSENS where indicated.

This manual is also suitable for:

Cartens3