7. Troubleshooting
Problem
After a break, the
product doesn't want
to start again
Low speed
Motor does not work
Motor runs rapidly
and can be controlled
after the switch is
turned on
Motor runs now and
again
Short range after a
full charging
Whether battery can
be charged or fully
charged
Controller is broken
9
Possible cause
Check if the normal position of the
brake is restored and the battery
turned on
Throttle doesn't work
Battery is full or not
Voltage is low
Battery life is over
Battery lock is broken
Handle bar has a wrong
connection with the controller.
Inner components of controller
are broken
Connecting points of battery is
broken
Battery lock is broken
Battery life is over
Issue with the battery voltage
Battery life is over
No output from charger
Charger cannot be connected
to the socket well
Short circuit is caused and
component is broken due to water
Solution
Restore the position of
brake lever. Restart the
battery
Repair or change throttle
Charging
Charging
Change battery
Change battery lock
Reconnect
Change controller
Adjusting or grind
connecting points
Change lock
Change battery
Repair or change battery
Change battery
Change charger
Change socket
Change controller
Need help?
Do you have a question about the Cyclee and is the answer not in the manual?