Safety And Instructional Decals; Unfolding The Handle - Toro 29641 Operator's Manual

Safety and Instructional
Decals
Important: Safety and instruction decals are
located near areas of potential danger. Replace
damaged decals.
1. Thrown object hazard—keep bystanders a safe distance
from the machine.
2. Cutting/dismemberment of hand or foot—stay away from
moving parts.
1. Warning—read the Operator's Manual.
2. Thrown object hazard—keep bystanders a safe distance
from the machine.
3. Cutting/dismemberment hazard of hand or foot, mower
blade—disconnect the spark plug wire and read the
instructions before servicing or performing maintenance.
4. Cutting/dismemberment hazard of hand or foot, mower
blade—stay away from moving parts and keep all guards
and shields in place.
5. Cutting/dismemberment hazard of hand or foot, mower
blade—do not mow up and down slopes, only mow across;
stop the mower and engine, pick up debris before operating;
look behind and down when reversing.
112-8760
117-4143
Setup
Important: Remove and discard the protective
plastic sheet that covers the engine.

1. Unfolding the Handle

Procedure
Folding or unfolding the handle improperly can
damage the cables, causing an unsafe operating
condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an Authorized
Service Dealer.
1. Remove the handle knobs from the mower housing
(Figure 3).
Important: Route the cables to the outside of
the handle as you install the handle.
1. Handle knob (2)
2. Move the handle to the operating position.
3. Install and tighten the handle knobs that you
removed in step 1 (Figure 3).
4
Figure 3