Sealey GSS2323.V2 Quick Start Manual

thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
instructions protection
1. Safety
WaRninG! ensure Health & safety, local authority, and general workshop practice regulations are adhered to when building this
‰
shed.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep children and unauthorised persons away from the working area.
9
dO nOt use the shed for any purpose other than that for which it is designed.
8
Use appropriate safety clothing including eye protection.
nOte! The assembly of this product will require assistance.
2. intROductiOn
Galvanized steel panels easily bolt and rivet together to form a rigid and secure structure. Features an apex style roof which gives
extra water runoff. Single door fitted with cross bolt and eyelet, that accepts padlock (not included) for additional security. Supplied
with bolt down fixing kit for secure fixing.
3. SpecificatiOn
mOdel no ............................GSS2323.v2....................GSS2323G.v2
Colour.........................................silver.................................Green
Roof type.....................................Apex..................................Apex
doors..............................................1.......................................1
overall size (WxDxH) ......2300 x 2300 x 2200mm* ....2300 x 2300 x 2200mm*
note ..................................*Minimum wall height
4. aSSembly
© Jack sealey limited
2.3 x 2.3 x 2.2m Galvanized Steel Shed
Model nos:
Wear protective Wear safety
gloves footwear
Original Language Version
GSS2323.v2 & GSS2323G.v2
Wear protective
clothing
GSS2323.V2 GSS2323G.V2 Issue 1 23/09/19
tools required
drill
Measuring tape
Cross head screw driver
Rivet gun
Rubber mallet
sturdy ladder
Adjustable spanner
2 Saw horses
3mm and 4mm drill
10mm Masonry drill