MABRU POWER SYSTEMS RVSC 12000 Manual page 5

A/C On/Off Indicator
Fan Speed
12V AC Controls
1. To turn the unit on locate the
2. To adjust the blower speed, locate the
3. The 12V Rooftop Air Conditioning unit comes with 3 different power modes. To change
the mode of the unit press then M on the unit to cycle between the 3 modes.
Modes
•
Max setting is the largest energy consuming mode and will provide the most
cooling in the shortest amount of time.
•
setting is the medium cooling setting and recommend for routine use.
•
ECO setting is the energy saving mode that uses the minimum number of amps
while providing cooling at a less efficient rate.
4. To view the current voltage being used by the unit. Simply press and hold the M button
for 6 seconds and the voltage value will appear on the screen. To exit the current
voltage mode, do not press any buttons for 6 seconds and the unit will return the main
menu automatically.
5. The display will always show the set temperature. The possible temperate ranges on the
unit vary between 5-40 degrees Celsius (Note: the units only come with temperature
settings in Celsius). To view the current inlet temperature, press the ↑ symbol for 6
seconds and the screen will display the temperature in Celsius. To view the current
outlet temperate press the ↓ for 6 seconds and the screen will display the temperature
in Celsius.
Fan On/Off Indicator
button and press until screen powers on.
button until the desired speed is selected.
System Inspect Indicator
High Mode
Normal Cooling Mode
Low/Economy Mode
4